A new firmware is now available for all AV600A models. The new firmware fixes the following issues:
1. Unit turning on at 5.00am for OAD update (over air download)
2. Channel edit feature not saving
Please note: This fix only applies to the following models; 22AV600A, 26AV600A, 32AV600A AND 37AV600A.
For 32AV600A, please check serial number before upgrading the firmware. For serial numbers starting from 944xxxxx and below, use L31 firmware and serial number starting from 945xxxxx and above uses L51 firmware.
You may follow the instructions below to resolve this issue.
1. Download the firmware update from here.
2. Copy the firmware update to a USB key.
3. Turn on your television and insert the USB key.
4. When the on screen menu comes up, highlight Yes and press OK on the remote. 
5. Your television will start the upgrade. Please do not interrupt or turn the unit off at this stage. 
6. Once update is completed, remove USB key and turn the television off.
Featured
Data Projector NPS10A
A compact and affordable solution for first-time buyers with SVGA resolution.
Learn more
FAQ
FAQ
